2024 Generac Power Systems Diesel Industrial Generator, 130kW SD130

Current Generac Power Systems Business Stationary-Power Diesel Industrial Generator, 130kW Diesel Industrial Generator, 130kW

Swipe to View More

Year 2024
Make Generac Power Systems
Model Diesel Industrial Generator, 130kW
Engine Piston Type: Alloy Aluminum | Crankshaft Type: Forged Steel

Shop Generac Power Systems Pre-Owned

Product Details Specifications Photos

Year 2024
Manufacturer Generac Power Systems
Model Name Diesel Industrial Generator, 130kW
Trim Name SD130
Generic Type (Primary) General
Engine Manufacturer Iveco/FPT
Emissions EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emissions Data Sheet
Cylinder Liners 6 | Cylinder Head: 2 Valve
Engine Type In-Line | Intake Air Method: Turbocharged/Aftercooled
Displacement 406.86 in3 (6.7 L)
Bore 4.09 in (104 mm)
Stroke 5.2 in (128 mm)
Compression Ratio 16.5:1
Engine Piston Type: Alloy Aluminum | Crankshaft Type: Forged Steel
Lubrication Oil Pump Type: Gear | Oil Filter Type: Full Flow
Cooling Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Belt Driven Centrifugal | Coolant Heater Wattage: 1500 | Coolant Heater Standard Voltage: 120 V /240 V

Industrial Generator, 130kW | Diesel | 6.7L

Businesses as well as the police, firefighters, and 911 call centers rely on our tested diesel technology to back them up. These engines in the SD130 are reliable, built to tolerate dirty fuel and are easy to maintain, making the decision a "no-brainer". The diesel generator cost is well worth the benefits, outlined below on the product spec sheet.

Features may include:

GENERATOR ENCLOSURE

Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.

INDUSTRIAL ALTERNATOR

Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.

POWERMANAGER® CONTROLLER

Generac engineers its generator controls with safety and convenience as top priorities.

Engine

Engine Manufacturer Iveco/FPT

Emissions EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emissions Data Sheet

Cylinder Liners 6 | Cylinder Head: 2 Valve

Engine Type In-Line | Intake Air Method: Turbocharged/Aftercooled

Displacement 406.86 in3 (6.7 L)

Bore 4.09 in (104 mm)

Stroke 5.2 in (128 mm)

Compression Ratio 16.5:1

Engine Piston Type: Alloy Aluminum | Crankshaft Type: Forged Steel

Lubrication Oil Pump Type: Gear | Oil Filter Type: Full Flow

Cooling Type: Closed Recovery | Fan Type: Pusher | Water Pump Type: Belt Driven Centrifugal | Coolant Heater Wattage: 1500 | Coolant Heater Standard Voltage: 120 V /240 V